Kuala Lumpur | Selangor | Shah Alam | Klang | Petaling Jaya | Subang Jaya | Cyberjaya | Rawang | Kajang | Bangi | Port Klang | Pulau Indah | Johor Bahru | JB | Pasir Gudang | Pengerang | Kulai | Batu Pahat | Muar | Kluang | Melaka | Bukit Rambai | Sungai Udang | Masjid Tanah | Alor Gajah | Nilai | Seremban | Senawang | Ipoh | Taiping | Penang | George Town | Batu Kawan | Bayan Lepas | Bukit Mertajam | Perai | Kulim | Sungai Petani | Kuantan | Gebeng | Kemaman | Kuala Terengganu | Kota Bharu | Kuching | Bintulu | Miri | Sibu | Kota Kinabalu | Labuan | Brunei

The Elcometer 2354 BS Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel orifice, for measuring the consistency of paints, varnishes and similar products.

The measured kinematic viscosity is generally expressed in seconds(s) flow time.

The Elcometer 2353 ISO Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel orifice, for measuring the consistency of paints, varnishes and similar products.

The measured kinematic viscosity is generally expressed in seconds(s) flow time.

The Elcometer 2352 AFNOR Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel orifice, for measuring the consistency of paints, varnishes and similar products.

• The measured kinematic viscosity is generally expressed in seconds(S) flow time.

The Elcometer 2351 FORD/ASTM Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel orifice, for measuring the consistency of paints, varnishes and similar products.

The measured kinematic viscosity is generally expressed in seconds(s) flow time.

The Elcometer 2350 DIN Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel orifice, for measuring the consistency of paints, varnishes and similar products.

The measured kinematic viscosity is generally expressed in seconds(s) flow time.

The Elcometer 2310 Shell Viscosity Dip Cups are stainless steel cups for quick measurements on-site or during production.

These viscosity dip cups are often used in the printing or ink industry.

Simply dip the cup into the product to be measured, lift it out and measure how long it takes for the contents to empty through the orifice.

The Elcometer 2290 Daniel Flow Gauge is a simple gauge used to conduct flow measurement of thick or paste-like materials, such as paints or printing inks.

A material is poured into the semi-cylindrical reservoir. When the gauge is lifted vertically, the product runs on a graduated plate, which is fixed perpendicular to the reservoir.

This method is ideal for measuring the consistency of paints, varnishes and similar products.

Simply dip the cup into the product to be measured, lift it out and measure how long it takes for the contents to empty through the orifice.

There are five cups with five different orifice sizes available, ranging from 5 to 1840cSt.

The Elcometer 2210 Zahn Dip Cup is a small U-shaped viscosity cup suspended from a looped wire.

This method is ideal for measuring the consistency of paints, varnishes and similar products.

Simply dip the cup into the product to be measured, lift it out and measure how long it takes for the contents to empty through the orifice.

Save time converting viscosity cup flow time into Centistokes (cSt) by using Elcometer’s free ElcoCalc™ Mobile App, available from the Android or Apple App stores.

Fast and easy to use, ElcoCalc™ instantly converts viscosity cup flow time in seconds into Centistokes (cSt).

The Elcometer 7062 Surface Roughness Tester is a light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards.

In protective coating applications there is a requirement to measure surface roughness.

The Elcometer Flat Surface Profile Probes are designed for use with the Elcometer 224 Digital Surface Profile Gauge.

Supplied with either standard cables or armoured metal reinforced heavy duty cables, Elcometer surface profile probes are supplied with a glass zero tile, calibration test foils (nominal values 125μm (5.

The Elcometer 224 Digital Surface Profile Gauge provides the very latest in surface profile measuring technology for measuring surface profile on either flat or curved surfaces.

The Elcometer 129 Surface Comparators are available in two models to suit your requirements.

The Elcometer 127 Surface Comparators are available in sand, shot or grit surface profiles.

Each comparator is supplied with 5 profile grades ranging from 0.5 – 5.5mils.

Designed for use with the Elcometer 127 illuminated magnifier, each comparator has a hole in the centre allowing for clear visual comparisons to be made.

The extremely durable 125 Surface Comparators allow the estimation of surface profile of either grit or shot blasted surfaces.

Using the Elcometer 125 surface comparators as a reference the blasted profile can be compared to the four reference profile grades in each comparator. Profiles are recorded in microns.

4 Profile Values per Comparator.

The Elcometer 123 Surface Profile Gauge is an easy to use analogue gauge.

The Elcometer 123 Profile Gauge measures the peak-to-valley height of a blast cleaned surface in a similar way to the Elcometer 224 Digital Surface Profile Gauge.

The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.

Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile.

Elcometer Convex Surface Profile Probes are designed for use with Elcometer 224 Digital Surface Profile Gauge.

The Elcometer 999 Surface Weld Comparator provides for the first time, a means of comparing the quality of welds.

Made from durable T Grade ABS plastic, the comparator comprises 14 different examples of actual welds, allowing a thorough evaluation to be completed.

The Elcometer 147 Weld Gauge measures many aspects of welds in both Metric and Imperial units.

The Elcometer 147 Weld Gauge includes:

• angle of preparation 0 to 60°
• misalignment (high – low)
• fillet weld throat size
• fillet weld length
• 2mm (0.

Elcometer 128 Pictorial Surface Standards are high quality photographs which are used for comparison purposes to assess the visual appearance of a steel surface.

Elcometer’s range of Surface Standards covers most of those required for surface cleanliness.

The Elcometer 119 Pipe Pit Gauge is a pocket sized gauge designed to identify the condition of a pipe.

The gauge is placed horizontally on the surface of the pipe and the stylus is positioned into the base of the corrosion pit.

The gauge shows the pit depth compared to the nominal pipe wall thickness.

Imperial units only.

The Elcometer 145 Dust Tape Roller is used in conjunction with the Elcometer 142 Dust Tape Test kit to assess the quantity and size of dust particles on surfaces prepared for painting.