Kuala Lumpur | Selangor | Shah Alam | Klang | Petaling Jaya | Subang Jaya | Cyberjaya | Rawang | Kajang | Bangi | Port Klang | Pulau Indah | Johor Bahru | JB | Pasir Gudang | Pengerang | Kulai | Batu Pahat | Muar | Kluang | Melaka | Bukit Rambai | Sungai Udang | Masjid Tanah | Alor Gajah | Nilai | Seremban | Senawang | Ipoh | Taiping | Penang | George Town | Batu Kawan | Bayan Lepas | Bukit Mertajam | Perai | Kulim | Sungai Petani | Kuantan | Gebeng | Kemaman | Kuala Terengganu | Kota Bharu | Kuching | Bintulu | Miri | Sibu | Kota Kinabalu | Labuan | Brunei

The most popular method in the world for testing the hardness of metals using a portable hardness tester is the Leeb method (ASTM A956). The so-called dynamic method for determining hardness is widespread due to its ease of use.

The Leeb Hardness Tester NOVOTEST T-D2 correspond to to ASTM A956 is the most popular metal hardness testing method in the world, because of very easy to use and does not require special skills from the operator. The probe is mounted on the sample, and by pressing the release button, measurement is performed, and the hardness value is displayed on the device’s screen.

The NOVOTEST Lab UCI wireless hardness tester implements the ultrasonic contact impedance method.

The users of NOVOTEST Lab UCI get the following advantages:

• Ultra-portable device for quick hardness testing anywhere – in laboratories or in field conditions, with autonomous continuous operation up to 20 hours.

New generation of ultrasonic contact impedance probe NOVOTEST UCI U2 for hardness testing.

In comparison with the previous version of the probe, the influence of the operator and measurement technique on the repeatability of results is significantly reduced. Any user without experience with such a device can do accurate measurements.

The most popular portable hardness tester in the world is the Leeb hardness tester, however, there are tasks that using this method is very difficult or even impossible to solve. This is due to the physics of the method, which assumes the massiveness of the testing object, to ensure the inertness of the product when the Leeb’s impact body hits the surface with a given force.

NOVOTEST T-U2 is the best price hardness tester in the world that works on UCI (Ultrasonic Contact Impedance) technology.

The FlawScout is a laser shearography non-destructive testing (NDT) sensor designed to be used for (post-production) quality control, academic research, or NDT training. The sensor can be configured with thermal or vacuum (partial) excitation systems depending on the application.

The FlawHunter is an integrated NDT inspection device, equipped with an advanced, high-resolution Laser Shearography sensor with a vacuum (partial) excitation system. It is ergonomic & easy-to-use and is equipped with a workflow-oriented, GUI-display and left/right-hand button control.

The FlawExplorer is a laser shearography NDT sensor designed to be used for post-production quality control applications or in-field (in-service) component inspections. Depending on the application, the sensor can be configured with thermal or vacuum (partial) excitation systems and may also be automated.

The new standard of eddy current structure test for production and laboratory.

The new standard of eddy current testing for production and laboratory.

Digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT).

The entry into the eddy current structure test.

Digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT).

Pulsed Eddy Current (PEC) is an inspection technique for inspecting carbon steel objects such as pipes and vessels, without the need for contact with the steel surface.

The EDDYCON CL is the latest eddy current instrument in our family. It is furnished with bright and large 7.2” display and combines the best features of earlier flaw detectors.

The EDDYCON CL eddy current flaw detector is intended for:

• Detection of surface cracks in various parts.

EddyView II is UniWest’s latest advanced, user-friendly, portable Eddy Current Testing (ECT)  / Eddy Current Array (ECA) instrument.

Specific formulations can be developed depending on your installation: water hardness installation in open or closed system, according to the type and the cleanliness of the parts tested, or the environmental issues (product of low COD) …

SREM Technologies also offers a gel coupling FLUXO (not fluorescent thixotropic gel) for the control of large areas.

Specific formulations can be developed depending on your installation: water hardness installation in open or closed system, according to the type and the cleanliness of the parts tested, or the environmental issues (product of low COD) …

SREM Technologies also offers a gel coupling FLUXO (not fluorescent thixotropic gel) for the control of large areas.

A WheelProbe is a specialised ultrasonic testing device designed for non-destructive mapping. It is primarily used for scanning large surface areas quickly and effectively, particularly useful in industries like aerospace, automotive, and marine for tasks such as corrosion monitoring and composite inspection.

We provide a comprehensive range of testing instruments tailored to meet the needs of various industries. Our offerings include Non-Destructive Testing (NDT), Material Testing, Metrology Measuring Systems, and more, ensuring high-quality and reliable solutions for every application.

We maintain strong partnerships with leading manufacturers in Europe, the United States, and select Asian countries, enabling us to deliver cutting-edge technology and innovative solutions to our clients.

Our product catalogue includes laboratory heat treatment furnaces, magnetic particle inspection equipment, noise and vibration solutions, and a variety of scientific lab equipment, among others.

Please contact us if you wish to know more about Universal Use Transducer.

Time-of-flight diffraction (TOFD) transducers and wedges generate refracted longitudinal waves in steel. These highly damped probes provide a high resolution for ultrasonic testing of welds. Sonatest manufactures composite and non-composite TOFD transducers of varying frequencies from 2MHz to 15MHz and crystal diameters ranging from approximately 3mm (0.125″) to 20mm (0.

The Shear Wave series from Sonatest are manual and automated transducers. They are available in a wide range of specifications with single or twin crystal options for general purpose ultrasonic testing and flaw detection, through to application-specific inspections. Browse through our extensive range of Shear Wave Transducers below.

Sonatest produce a wide offering of phased array transducers in two different lines – X-Series and DAAH.

Sonatest offer a comprehensive selection of Phased Array Ultrasonic Testing (PAUT) transducers, meticulously hand-built to ensure high quality and durable construction.

Corrosion mapping identifies and maps variations in material thickness due to corrosion. Results for corrosion mapping provide a high degree of repeatability and the advantage of position and size data for every flaw. This can be compared to repeat scans of the same area to track flaw growth or corrosion rates both generally and for individual pits.

Sonatest have three different offerings in single and dual “straight beam” transducers – Contact, Twin Crystal and Delay Line.