Chonburi | Rayong | Ayuthaya

Mechatec Bending Test Machine

Mechatec bending test machine is designed for cold bending and plane reverse bending test of steel bars or any metal solid sample. Its main parameter meets the compliance standards of GB/T 1499.

Mechatec Impact Testing Machine

Mechatec impact testing machine helps customers to determine the resistance of a material or component to a rapid load under varying environmental conditions. With our instruments customers can get an accurate and precise result.

Mechatec Compression Tester

Our Mechatec compression tester model is design to conduct compression and crushing strength tests on containers, concrete cubes & cylinders in accordance with international standard.

Mechatec Vickers hardness tester is suitable for a wide range of applications, including micro hardness testing. With automatic and digital results, customer can get an accurate, precise and zero human error.

Mechatec Rockwell hardness tester is designed to determines the hardness by measuring the depth of penetration of an indenter under a large load compared to the penetration made by a preliminary test force.

The Digital Rockwell hardness tester is equipped with big screen LCD monitor.

Mechatec Brinell hardness tester used to test materials that have a structure that is too coarse or that have a surface that is too rough to be tested using another test method, e.g., castings and forgings. Brinell testing often use a very high-test load and a ball indenter so that the resulting indentation averages out most surface and sub-surface inconsistencies.

The Belec Vario Lab again sets a unique standard in terms of precision and flexibility as it has been continuously improved in order to fulfill today’s needs for metal analysis.

It is – again- the most competitive in terms of flexibility as far as sample size and shape is concerned.

Belec again raises the standards in the compact analyzer class. The all new model Belec OPTRON guarantees an unbeaten performance using a unique compact spectrometer design. It is used in the traditional foundry business as well as in incoming inspection or the recycling industry. Any metal processing company can take advantage of the very attractive price to performance ratio.

The Pegasus Crime Kit consists of three high intensity alternate forensic lights for crime scene investigation and forensic laboratory use. There are seven different wavelengths accommodated in these three lamps. The wavelengths available are: Blue 455 nm, Cyan 505 nm, Green 530 nm, Amber 590 nm, Red 625 nm, UV 365 nm and White Light.

The Nova Crime Kit consists of eight high intensity alternate forensic light sources for crime scene investigation and forensic laboratory use. The wavelengths available are: Purple 400 nm, Blue 455 nm, Cyan 505 nm, Green 530 nm, Amber 590 nm, Red 625 nm, UV 365 nm and White Light.

The Aris Crime Kit consists of four high intensity alternate forensic light sources for crime scene investigation and forensic laboratory use. The wavelengths available are: Blue 455 nm, Green 530 nm, Amber 590 nm and UV 365 nm.

The LEDs emit a wide beam of light that is “evenly” distributed. The battery running time is 4 hours, continuously.

The Elcometer 3238 Long Edge Wet Film Combs are wire eroded to provide an accuracy ±5% of marked value or ±3μm (0.12mil), whichever is greater, and are supplied with either Metric or Imperial measurements.

Each comb has 24 measurement steps (teeth) providing a more accurate wet film thickness value.

The Elcometer 3233 Pfund Thickness Gauge is used to measure the film thickness of wet translucent products such as varnishes, paints and oils.

Available in aluminium or stainless steel this instrument consists of two concentric cylinders, one sliding inside the other.

The Elcometer 3230 Wet Film Wheel is a high precision, accurate and easy to use instrument which consists of a set of three wheels. The central wheel is of a smaller diameter and is eccentric relative to the two outer wheels.

By rolling the gauge through a wet coating, the centre wheel eventually touches the film. This point on the scale indicates the thickness.

Available in four scale ranges, the Elcometer 155 Uncured Powder Film Comb is designed to measure uncured powder coating film thickness.

This enables the application system to be set up and fine tuned prior to the curing process. In turn, this will reduce the amount of scrap and over-spray.

The Elcometer 154 Plastic Wet Film Combs are made from ABS plastic and are designed to be used once and kept as a record of wet film thickness measurement for quality assurance or customer requirements.

Metric and Imperial values are on the same comb, 50 to 800μm on one side, 2 to 32mils on the other.

Supplied in a pack containing 500 combs.

The reusable precision stainless steel Elcometer 115 Wet Film Combs are made to be long lasting and are supplied with either Metric or Imperial film thickness measurements.

Four separate thickness ranges are available up to a maximum of 1,250μm or 50mils and are manufactured to an accuracy of ±5% of marked value or ±3µm (0.

The Elcometer 112AL punched aluminium combs offer the user a low cost method of measuring the wet film thickness.

The Elcometer 112AL, being punched from aluminium, is not as accurate as precision formed stainless steel wet film combs and has a shorter lifespan.

The Elcometer Hexagonal Wet Film Combs are designed for wet film thickness measurements and come in a range of thickness scales.

These hexagonal precision formed stainless steel wet film combs are long lasting, reusable and supplied in a range of thicknesses measuring up to 3,000μm (120mils).

Taber® Abrading Wheels are available in five levels of abrasiveness to suit a wide range of material testing applications.

• Description

Wool, felt or plain rubber wheels test delicate materials or abrasiveness of materials such as dental powders.

Whatever your product, be it curved, round, big or small, the Linear Abraser from Taber® can test it all.

Using a free floating head to follow the contours of the sample, the Taber® 5750 is the ideal abrasion tester for flat or curved surfaces. It may also be used as a scratch tool, using the scratch kit accessory.

In a typical scrub test, the coating is applied to the Leneta Scrub Test Panel at a specified film thickness, allowed to dry and then subjected to scrubbing with a straight-line scrub tester.

When used in accordance with ASTM D2486, Method A, a 10mil shim is inserted under the panel to accelerate failure and thereby reduce testing time.

The Elcometer 1720 Abrasion and Washability Tester is robust, reliable and extremely versatile and is designed for testing the washability, brushability and resistance of a wide range of materials.