Chonburi | Rayong | Ayuthaya

The Elcometer 900 Illuminated (x50) Microscope is a simple, graduated x50 magnification microscope with internal illumination.

The Elcometer 147 Weld Gauge measures many aspects of welds in both Metric and Imperial units.

The Elcometer 147 Weld Gauge includes:

• angle of preparation 0 to 60°
• misalignment (high – low)
• fillet weld throat size
• fillet weld length
• 2mm (0.

The Elcometer 144 Paint Safe Marker Pens are used to highlight visual areas of non conformance, providing a clear indication of areas where rework or other processes need to be carried out.

The Elcometer 137 Illuminated (x10) Magnifier is used to establish the level of material’s condition, profile and cleanliness – ideal for close surface inspection.

From time to time a closer inspection of a surface is required to ascertain the exact conditions of the material’s profile, cleanliness etc.

The Elcometer 132 Safety Torch / Flash Light is CE marked to the ATEX directive and IECEx.

The Elcometer 132 is certified for safe use in Zones 1 and 2 potentially explosive gas, vapour and mist atmosphere, where a T6 or T4 class permits, and Zones 21 and 22 dust atmospheres, with certified maximum surface temperatures of 65°C or 95°C.

The Elcometer 131 range of inspection mirrors includes telescopic and illuminated mirrors that are ideal for inspecting difficult to access areas – inside pipes, behind corners or underneath inspection tanks.

The Elcometer 3120 range of Shore A and Shore D Durometers is widely used to test the hardness of soft materials.

A round point indents the material under a fixed force spring and the hardness is displayed on the dial in Shore Hardness Units.

The instrument can be used either hand-held or fitted to an optional stand for increased repeatability.

The Elcometer 3101 Barcol Impressor Hardness Tester is easy to use and ideal for measuring the hardness of soft metals, plastics, glass fibre and leather.

Measuring a coating’s hardness using the indentation method, the Elcometer 3095 Buchholz Hardness Tester consists of a bevelled disc indenting tool that is fitted into a stainless steel block exerting a constant test load of 500g (17.6oz).

The gauge is placed onto the coating and then removed after 30 seconds.

The Elcometer 3092 Sclerometer Hardness Tester measures the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

The Elcometer 3092 tests the hardness of a coating by moving a Tungsten Carbide Tip over the coating with a predetermined force.

The set of Elcometer 3080 Hardness Testing Pencils provide a simple but effective technique to evaluate the hardness of many coatings.

The Elcometer 3025 Scratch/Shear Tester is used to test the resistance of many materials to scratching, shearing, gouging, marring, scraping and engraving.

This portable tester measures materials up to 12.7mm (½”) thick by 101mm (4”) square or round.

The Elcometer 3000 Motorised Clemen Unit is a robust and accurate instrument for evaluating the resistance to scratching of a coated surface. The sample can be metal, wood, glass, plastic or other hard materials.

A tool is fitted with a hemispherical tip of 1mm (0.

The Elcometer 3000 Manual Clemen Unit is a robust and simple to use instrument for evaluating the resistance to scratching of a coated surface.

A tool is fitted with a hemispherical tip of 1mm (0.04”) diameter (standard), lowered gradually onto the sample surface which is then pulled linearly 60mm (2.36”).

The Elcometer 1538 DIN Scratching Tool has interchangeable carbide cutters for the preparation of specimens to be used for corrosion testing.

Supplied complete with a 0.5mm (0.02”) or 1mm (0.04”) cutter.

An adjustment device to ensure the accurate setting of the blade is available as an optional accessory.

The Elcometer 1537 ISO Scratching Tool is a simple but effective instrument that is used to scratch the surface of samples in preparation for adhesion, salt spray and corrosion tests.

The tool is held horizontally and pulled across the sample to produce the scratch.

The Elcometer 501 Pencil Hardness Tester has been designed to ensure that the cylindrical pencil lead is maintained at a constant angle of 45° and exerts a force of 7.5N (1.68lbF).

The pencil hardness test also referred to as the Wolff-Wilborn test, uses the varying hardness values of graphite pencils to evaluate a coating’s hardness.

We provide a comprehensive range of testing instruments tailored to meet the needs of various industries. Our offerings include Non-Destructive Testing (NDT), Material Testing, Metrology Measuring Systems, and more, ensuring high-quality and reliable solutions for every application.

We maintain strong partnerships with leading manufacturers in Europe, the United States, and select Asian countries, enabling us to deliver cutting-edge technology and innovative solutions to our clients.

Our product catalogue includes laboratory heat treatment furnaces, magnetic particle inspection equipment, noise and vibration solutions, and a variety of scientific lab equipment, among others.

Please contact us if you wish to know more about Elcometer 480 Glossmeter.

The Elcometer 6910 Setaflash ‘Series 8’ Closed Cup Tester is an automated closed cup tester with a temperature range of ambient to 300°C (ambient to 572°F).

The Elcometer 6910 Setaflash ‘Series 8’ Active-Cool Closed Cup Tester offers the same features as the Setaflash ‘Series 8’ Closed Cup Tester but is designed with a temperature range of -30°C to 135°C (-22°F to 275°F) with no external cooling required.

The Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (Corrosion Resisting) offers the same feature as the Active Cool Closed Cup Tester but comes with a corrosion resisting insert in the cup for testing corrosive samples.

The Elcometer 6910/3 Setaflash ‘Series 3’ Active-Cool Closed Cup Tester offers the same features as the Elcometer 6910/1 Setaflash but is fitted with a cup suitable for testing corrosive samples.

The Elcometer 6910/2 Setaflash ‘Series 3’ Open Cup Tester offers the fastest and most accurate flash point instrument at a cost effective price.

Certain substances, classified as “flammable” by closed cup flash point testing, may be reclassified as “non-flammable” by combustibility testing.

The Elcometer 6910/1 Setaflash ‘Series 3’ Closed Cup Tester is an easy to use instrument that can complete a flash/no flash test in less than two minutes or determine the flash point of a sample within a temperature range of ambient to 300°C (ambient to 572°F).