Chonburi | Rayong | Ayuthaya

The Elcometer 7410 Concrete Moisture Meter is an accurate and easy to use non-invasive instrument for non-destructive measurement of moisture content of concrete.

The electrodes transmit parallel low frequency signals, calibrated to give average moisture content by comparing the change in impedance between damp and acceptably dry concrete.

The Elcometer 7000 Digital Moisture Meter range offers accurate and easy to use moisture measurement.

Available in two versions, the Concrete Moisture Meter has a non-invasive probe that emits a radio frequency to penetrate the surface to detect moisture. Ideal for rapid surveys of solid wall, floors and ceramic tiles.

The Elcometer Qualicoat Powder Coating Inspection Kit provides the various test instrumentation required to meet the high standards of the Qualicoat Organisation.

The Qualicoat Organisation brings together the ideals of several National Coating Associations into one quality label for powder coatings on aluminium architectural components.

The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.

The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.

The Elcometer Protective Coating Inspection Kit 6 is a comprehensive kit that incorporates all the key gauges and inspection accessories required to assess a structure before, during and after the coating has been applied.

A more comprehensive kit than kits 1-4, the Elcometer Protective Coating Inspection Kit 5 expands the range of instruments available to the protective coatings inspector.

The Elcometer Protective Coating Inspection Kit 4 provides a range of test equipment to help an inspector assess a substrate prior to the application of a coating.

The Elcometer range of Protective Coating Inspection Kits provides all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness and adhesive testing.

The Elcometer range of Protective Coating Inspection Kits provides all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness and adhesive testing.

The Elcometer range of Protective Coating Inspection Kits provides all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness and adhesive testing.

The Powder Coating Inspection Kit covers all eventualities in the powder inspection process.

Elcometer has produced this kit to enable the inspection of powder coatings on all surfaces.

By using the Elcometer 456 Ferrous Top Gauge with the specially designed probe and duct cleaning templates, readings can be taken of the deposit thickness on a specific test area, before and after cleaning.

Controlling ducting deposits and monitoring their build-up is essential to maintain hygiene standards and reduce fire risks in heating and ventilation systems.

Available as a Basic or Top version, these Digital Inspection Kits have been specifically designed to undertake the three principal inspection requirements in the Protective and Industrial Coatings Industry – climate, surface profile and dry film thickness.

The Elcometer Blasting Inspection Kit is a surface preparation inspection kit providing a range of inspection equipment to test surface profile and surface contamination of blasted profiles.

An Elcometer 456 Gauge and probe can also be supplied. (Order separately if required).

The Elcometer Automotive Inspection Kit provide an instant measure of the coating thickness of panels.

The Elcometer Automotive Inspection Kit are produced specifically for the automotive aftermarket and insurance Assessors, 3rd party consultants, body shops and used car sales.

An illuminated magnifier is supplied to enable close inspection of bodywork.

The Elcometer 1615 Impact Tester comes as one universal assembly with the option of seven different kits providing the functionality for various impact testing methods.

The Elcometer 280 is a ‘stick type’ holiday detector which has been designed to make pulsed DC high voltage holiday detection safer, easier and more reliable than ever before.

The Elcometer 270 Pinhole Detectors Inspection Kit utilises the wet sponge technique and has been designed to set a new standard for wet sponge detectors – a high quality, low voltage detector with similar accessories to a high voltage spark tester.

The Inspector’s Kit does not include the main instrument; simply add the model number to the order.

Measuring the level of contaminants on a surface prior to application of the coating is essential to ensure the quality of the coating and that its optimum lifetime is achieved.

If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly recoating and high maintenance costs.

It is essential that the level of contaminants on a surface is measured prior to the application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.

If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs.

Testing abrasives on site for soluble salt contamination can be carried out quickly and easily using the Elcometer 138 Abrasive Soluble Salt Test Kit, according to the ASTM D4940 method.

Abrasives used for blast cleaning surfaces can be contaminated with soluble salts due to the source or the re-use of the blasting media.

The Elcometer 134 CSN Chloride, Sulphate & Nitrate Test Kit is designed to accurately measure surface chloride, sulphate and nitrate ions in minutes and offers a single kit solution for testing in the field.

All the components of the Elcometer CSN Test Kits are pre-measured and pre-dosed for trouble free testing.

The Elcometer Fitz’s Atlas 2 of Coating Defects (EFA) takes the reader through a comprehensive range of problems and discusses each in detail.

EFA provides the User with a greater understanding of the defect, the probable cause and possible solutions.

The Elcometer 7210 Pocket Microscope is an extremely practical microscope used for site inspections.

Having x30 magnification and an inbuilt light source, the Elcometer 7210 Pocket Microscope is the ideal choice for close up investigation of defects and surface cleanliness.